History of ELBAS

1994 The company „ELBA servis“ was established, engaged in the development, production and installation of electrics for a newly established bus producer – SOR Libchavy.
2000 There were 23 employees using rented space for workshops and offices - 300 m².
2001 All activities were transferred to ELBAS, Ltd
ELBAS also expanded activities in software development for CAN-bus data level testing and monitoring (particularly in the SAE J 1939 and ISO 11992 protocols).
Land in an industrial zone in Chocen and the former “Melš-Koventa” production plant were purchased.
2002 After a year of renovations, the company moved into new facilities with an area of about 800 m².
2003 Another production workroom was built and the mechanical workroom was upgraded.
An agreement on collaboration and customer technical support in KIBES system applications in vehicles and machines was signed with module producer Continental AG – based on this agreement ELBAS is allowed to use the title of „Recommended System Partner of CONTINENTAL AG“.
2005

After intensive training ELBAS became an authorised centre for development of PLUS 1 applications by Sauer-Danfoss.
„PLUS 1 Authorized Application Center“ (+1AAC) for ČR, Slovakia and Poland

2006 ELBAS fulfilled all requirements to receive ISO 9001:2000 certification.
Renovations of the first floor for the design department were finished.
A new materials warehouse was also built.
2008 A new assembly hall was constructed adjacent to the original building -> the total production space had tripled.
2009 Recertification of the quality system according to ISO 9001:2001
2010 Re-cultivation of the company area, improvements and extension, increase of parking spaces.
2012 Recertification of the quality system according to ISO 9001:2008.
Construction of new storage areas and mechanical workshops.
2014 Completion of the production hall and office space

2015

   -

2016

  

We have bought the adjacent areal and we have begun with reconstruction of a building, construction of a new production hall and surrounding reclamation. Now, we can offer you: 

  • Production area            2 124 m2
  • Storage space                536 m2
  • Office space                   386 m2
  • Commercial premises     536 m2

 

aerial viewELBAS, Ltd. was established as a direct continuation of the successful company "ELBA Servis". "ELBA Servis" started production in 1994, developing and producing complete electric systems for the newly established bus producer - SOR Libchavy. "ELBA Servis" continued to grow and develop; the number of customers increased and as it did, the product range also grew. In 1995, the company moved into new facilities, where it continued production with 23 employees and a total production area of about 300m2. The expansion of business activities and corresponding increases in yearly turnover led to ELBAS being converted into a limited company.
ELBAS also expanded activities in software development for CAN-bus data level testing and monitoring (especially in the SAE J1939 and ISO 11992 protocols). In the summer of 2001 ELBAS bought the former "Melš-Koventa" production plant. After a year of renovations, the company moved into new facilities with an area of about 800 m2. In the summer of 2003 another production workroom was built and the mechanical workroom was upgraded.
After carefully examining the multiplex systems available for commercial vehicles the KIBES platform from Continental AG (previously Siemens VDO Automotive) was chosen as the basis for a new generation of electronics installation design. In this platform, the traditional wiring is replaced by a digital network of modules communicating through a CAN-bus protocol. An agreement was signed in July 2003 with module producer Continental AG which gives ELBAS the responsibility for technical support in applications of these systems. Based on this agreement ELBAS is allowed to use the title of "Recommended System Partner of Continental AG".
For hydraulic control applications (particularly in mobile machinery), we decided to use the PLUS 1 platform by Sauer-Danfoss as the basis of the electronic system. After intensive training in the programming environment of PLUS 1 Guide, Elbas became a PLUS 1 Authorized Application Centre (+1AAC), providing technical support for customers of Sauer-Danfoss in the Czech Republic, Slovakia and Poland, and developing applications for the PLUS 1 system.

Renovations of the first floor were finished in the summer of 2006, which became the new home of the design department. A new materials warehouse was also build. At the end of the year, production began in a newly renovated workshop leased in a near by factory, with an area of over 300m2.

In 2008, a new assembly hall was constructed adjacent to our original building, almost tripling the total area of storage and production space.
During year 2010 we made the gradual rehabilitation of the neighborhood, increased parking spaces, flags with logos and a few other minor adjustments. 
            

 

WE SUPPORT


We support also little starsHC Spartak Choceň

FK AGRIA Choceň

TJ Sokol Sruby

Horolezecký klub Choceň

Cyklistický oddíl J. Voleský

Český rybářský svaz, místní organizace Choceň

Domov Simeon, Pečovatelská služba v Horním Jelení

Rybářský spolek Vrchovina

 Performance of children from the orphanage at a company party 2014

Mateřská škola Záměstí, Chcoceň

Stacionář Mraveneček

Dětský domov Potštejn

Junák - svaz skautů a skautek ČR, středisko SKÁLY Choceň

Sdružení SOS dětských vesniček

Základní a Praktická škola SVÍTÁNÍ, o.p.s.

Great work of teachers in primary and practical school SVÍTÁNÍ

 

 

 

 

 

 

Teaching methods in primary and practical school SVÍTÁNÍ



Contact

ELBAS, s.r.o.
Vysokomýtská 1202
565 02 Choceň

Contact us

Tel.:  (+420) 465 471 380
Fax.: (+420) 465 483 096
E-mail: elbas@elbas.cz

© 2017 Elbas, s.r.o.

Private policy | Sitemap

Created by eBRÁNA s.r.o. | Powered by CMS WebArchitect | SEO a internetový marketing

to top ↑